driect and reverse circulation economical water well drilling rig 400m depth

water well drilling rig 400m drill depth mechanical transmission hydraulic lift and lowering ISO9001:2000

                                                    S600 trail water well drilling rig

1.details 

the water well Drilling rig model S600 is a trailer mounted rig, with all its components  (Including generating set, gear box, transmission box, rotary table, hoist, dual hydraulic cylinder -feed mechanism of steel cable, mast, mud pump. Etc) are mounted on the trailer .

 

The drilling rig is mainly mechanical driven. Most of the operating mechanism is hydraulic driven and the other part is mechanical driven.

 

In addition to the main operating mode of rotary drilling by rotary table and mud. The drilling rig can be adapted other drilling if it is equipped drilling tool that is suitable for drilling through various strata such as clay, sand and matrix etc. At the beginning of boring, pressuring mechanism may be used for drill tool to effect pressuring drilling, thus promoting the efficiency of shallow -hole drilling. With the increased depth, when the weight of the drill tool is greater than the pressure required applying to the drill tool, the main hoisting system should be used to carry out reduced pressure drilling.  

 

The drilling rig is equipped with a main hoist, a secondary hoist and a tool hoist. The main hoist is used for lifting or lowering of the drill tool, lowering of the well pipe. The secondary hoist is used for driving percussive earth excavator or other coring tool and sand reel to extract sands sample or core and silt in the well. The tool hoist is used for elevating the movable table and other tools to reduce physical labor.

 

2.uses

 

(1) Exploration and investigation of hydro-geological condition.

 

(2) Water well drilling for agriculture irrigation, industry and national defense.

 

(3) Ventilation of underground tunnel. It can also be used selectively in building engineering

 

3.Main Technical Parameter 

Model	S400
Max drilling diameter(mm)	650
Drilling depth(m)	400
Speed of rotary disk(RPM) (r/min)	22  59  86  126
Moment of torque of rotary disk((KN.m)	13.7  5.1  3.5  2.3

Main Technical Parameter of S600 drilling 

Maximal Diameter of Turntable(mm)	Φ650
Drilling Depth(m)	600
Turntable Speed(r/min)	22,59,86,126
Torque(kN.m)	13.7, 5.1, 3.5, 2.3
Effective Height of Rig(m)	14
Load of Rig(kN)	385
Overall Dimensions (L x M x H)(m)	Towing State: 10*2.8*4.1
	Working State: 5.65×4.15×16.7
Weight(t)	12

   

lOil box:offer oil to the hydraulic system. lTransmission:control the speed of drill. lControl rod:use to raise the drill rig,down the drill rig and the speed of the hoisting lMotor: offer the power for the transmission systemlHoisting:raise the drill rig,down the drill rig lUp tower tank:stand up tower  lHoisting:raise the drill rig,down the drill rig lTurntable:drive the drilling pipe to drill lSquare hole: the drill pipe drill into  

  

lShackle cylinder:screw off the first buckle,between the drill pipe,the link is the screw,it must screw off use the shackle cylinder lDrive shaft:drive the turntable to turn  

Mud Pump

Mud Pump Model:BW850/2
Diameter of Cylinder	150mm
Stroke of Piston	180mm
Flow Rate	850L/min 600L/min
Pressure of the Pump	2Mpa 3Mpa
Input Mud Pipe	Φ125mm
Output Mud Pipe	Φ64mm
Diesel Generator
Power	136 HP
Brand	Cummins

driect and reverse circulation economical water well drilling rig 400m depth